Quote · Disconnect · Rig · Pay
Industrial Electrical Equipment Buyers Serving Severn, MD
Whether it is one pad-mount transformer behind a Severn building or a full plant scope from the incoming substation down to the receptacles, we will buy it as it sits. Send a nameplate photo, a rough count or a walk-through and the written offer comes back the same business day, in a form you can hand straight to purchasing.
Same-day written offer
Get a Written Offer
Send the asset list, or just describe what is in the room. We come back the same business day with a written, itemized offer.
Faster: call 954-740-1983
Email an asset list to electricalequipmentbuyers@gmail.com
Mon–Sat, 7am–7pm ET. We never resell your contact information.
- Location
- Severn, MD
- State
- Maryland
- Utilities
- BGE, Pepco, Delmarva Power, Poto
- Offer
- Same business day
- Payment
- Before load-out
- Phone
- 954-740-1983
This city
Buying electrical equipment in Severn
Coverage in Severn is run off our Maryland routing along I-95, I-495, I-70, I-83 and I-97. Coordination with BGE, Pepco, Delmarva Power, Potomac Edison, SMECO on clearances, metering removal and final disconnect is part of the scope, not a change order. Maryland concentrates around Baltimore and the Washington approaches, and the mix is unusually institutional. The Sparrows Point steel legacy and the port and rail infrastructure on the Patapsco produced heavy medium-voltage equipment that continues to surface as those sites redevelop. Federal facilities, defence contractors, and the research and hospital complexes from Johns Hopkins through the Bethesda and Rockville corridor replace essential-power systems under documented programs, which means good nameplates, real test records and equipment that prices as reusable rather than as metal. The data center corridor just over the Virginia line pulls upgrade work into this state as well. BGE and Pepco both run dense urban distribution with strict clearance procedures. The Port of Baltimore gives an export-bound lot a berth inside an hour of most of these sites.
If the Severn equipment is still carrying load, we phase it. Usually that means dead sections and spares first, then distribution as circuits are released, then the main line-up once the last feeder is isolated. The phasing goes into the offer so nobody is improvising in an energized room at two in the morning.
Equipment
What we buy in Severn
Fourteen categories. We buy every one of them at Severn sites.
Bus Plugs
Fusible switch and circuit-breaker plugs
30 A – 1,200 A fusible and breakerBus Duct & Busway
Feeder and plug-in, copper and aluminum
225 A – 5,000 A runsElectrical Switchgear
Low and medium voltage, indoor and outdoor
480 V – 38 kV, up to 5,000 AGenerators
Standby, prime and mobile sets
100 kW – 3 MW diesel and gasTransformers
Pad-mount, dry-type, substation, unit
75 kVA – 50 MVAPanelboards & Switchboards
Panelboards, switchboards, distribution
100 A – 4,000 AWire & Cable
Copper and aluminum, new and reclaimed
#12 AWG – 1,000 MCMCircuit Breakers
Molded case, insulated case, air, vacuum
15 A – 6,000 A framesMotor Control Centers
Low and medium voltage MCCs
MCC line-ups, buckets, VFD sectionsSubstations
Up to 138 kV primary
Complete unit and station substationsTransfer Switches
Automatic, manual, bypass-isolation
100 A – 4,000 A ATSCapacitors & Power Quality
Fixed and automatic capacitor banks
50 kVAR – 10 MVARComplete Plant Lots
One deal, one crew, one number
Whole-facility electrical scopeValuation
What drives the number
Three things drive the number: condition, whether the equipment is still supported, and copper content. A medium-voltage line-up with current vacuum breakers and a recent test report prices as reusable equipment. An identical structure with obsolete air-magnetic breakers and no nameplate prices on its bus and steel. We tell you which bucket your Severn gear falls into before you commit to anything.
| Input | Detail |
|---|---|
| Condition | Working, retired, water-damaged, or already dismantled |
| Support | Are breakers and parts still available for this line-up? |
| Copper | Windings, bus bar and cable weight |
| Access | Rigging path, crane need, dock reality at the Severn site |
| Freight | I-95, I-495, I-70, I-83 and I-97 |
Safety
Safety and documentation
If your Severn facility runs permits — hot work, confined space, elevated work, site orientation, background checks — tell us at the quote stage and we build the time into the schedule rather than asking for an extension later. Our people are used to refinery, hospital and utility permitting cultures.
Paper you receive
Certificate of insurance before we mobilize, a written itemized offer, a signed bill of sale, and load documentation for every trailer. If your compliance team needs something specific, ask before we schedule.
Nearby
Nearby cities and buyer desks
Other Maryland locations we buy electrical equipment in:
Common questions
Severn questions
Do you buy equipment that is still energized and in service?
Yes, and most of what we buy is. We quote it now and remove it on your cutover date. Telling us at the quote stage which Severn assets are still live lets us build the phasing and the clearance coordination into the schedule from the beginning.
Our electrical room is in a basement with a tight door. Is that a problem?
It is routine. Switchgear sections, transformers and gensets frequently have to be cut down or partially disassembled to clear a door width, an elevator limit or a stair turn. The access survey at your Severn site establishes the path before we commit to a date, and that cost is already inside the offer.
Will you take the equipment we cannot sell along with the good items?
Yes, and this is usually why sellers choose us. Cherry-picking leaves you holding the leftovers of the leftovers. We price the Severn lot as a whole — good gear, obsolete gear and the scrap fraction together — so the electrical room ends up genuinely empty.
Do you provide documentation for surplus property or audit records?
Yes. Itemized purchase agreements, weight tickets, bills of lading, oil disposal manifests and recycling documentation are standard on Severn purchases. Public agencies and audited facilities get the paperwork their process requires without having to ask twice.
Do you actually buy electrical equipment in Severn, or just broker it?
We buy it. Northeast Electrical Buyers is the purchaser of record — we fund the purchase, send our own crews to Severn to disconnect and load, and take title when the equipment leaves your dock. There is no third party behind us waiting to approve the price.
What is the smallest job you will take in Severn?
A single transformer, one switchgear section, a pallet of breakers or a few boxes of breakers is worth a call. Because we route crews across Maryland continuously, small Severn pickups usually get added to an existing run rather than priced as a dedicated trip.
Electrical equipment in Severn?
Photos of the nameplates are enough to start. Written offer the same business day.